Arris WTM652 User Guide Manuel d'utilisateur télécharger pdf (Page 42)

Safety

Getting

Started

Battery

Installation

Wireless

Conﬁguration

Ethernet

Conﬁguration Usage Troubleshooting Glossary

Touchstone WTM652 Telephony Modem User’s Guide

c. If your client device asks for the router’s PIN number: Enter the WTM652

PIN. The PIN can be found on the WPS screen (AP Active PIN) or on a

sticker on the back of the WTM652.

4. If the connection is successful, the Secure indicator stops ﬂashing and re-

mains lit. Otherwise, the Secure light continues to ﬂash for up to two min-

utes (indicating that it is ready to accept a client connection) then turns off.

If the Secure light turns off, start again at step 1.

Note: When WPS is enabled, the WTM652 displays the status, network

name, security type, encryption type, and passphrase at the bottom of the

WPS screen. If your client does not support WPS, use these settings to man-

ually conﬁgure the client.

You have completed the basic conﬁguration steps. Unless your cable operator re-

quires additional conﬁguration, which would be described in the information packet,

you should now be able to access the Internet. If you want to further customize

your conﬁguration, proceed as follows:

• Conﬁguring the Firewall

• Conﬁguring DDNS

• Conﬁguring Wireless Bridging

If you have any problems, proceed to Troubleshooting.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 84 85

Pas de commentaire

Arris WTM652 User Guide Manuel d'utilisateur Page 42