Arris Touchstone CM550 Guide de l'utilisateur télécharger pdf (Page 14)

Home Prev Next Touchstone CM550 Cable Modem User’s Guide 14

Safety Getting Started Installation USB Drivers Usage Troubleshooting Glossary

Mounting the Cable Modem

You can either mount the Cable Modem on a wall or place it on a desktop. For wall-

mount applications, you can mount the Cable Modem with the indicators facing up-

ward (vertical) or to the size (horizontal).

Tools and Materials

For wall-mounted installations, make sure you have the following tools and mate-

rials before proceeding:

• screwdriver (flat-blade or Phillips, depending on what kind of screws you

use)

•wall-mount template (included with the Cable Modem Quick Installation

Guide)

•transparent tape (for temporarily securing the mounting template to the

wall)

•for mounting on plywood or studs: two #6 (or #8) x 38.1 mm (1.5 inches)

self

tapping screws; the head diameter should be approximately 6 mm

(0.25 inches)

•for mounting on drywall: two 1.5 inch (35mm or 40mm) anchor bolts

Location

Always position the Cable Modem:

•within 1.3 m (4 feet) of an AC outlet. The power cord must reach the outlet

without stretching and without adding extension cords.

• near a cable outlet (to avoid long cable runs).

Note:

When mounting the Cable Modem on drywall, try to position the Cable

Modem so at least one of the screws are fastened to a stud. This may

prevent the Cable Modem from pulling out of the wall in the future.

To prevent overheating your Cable Modem, do not block the ventilation

holes on the sides of the unit.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 39 40

Pas de commentaire

Arris Touchstone CM550 Guide de l'utilisateur Page 14